AMG fender spacer kit details and install

Welcome to the Mercedes 190 forum

Welcome to the Mercedes 190 owners forum, the place to be for all owners and lovers of the Mercedes 190E, 190 and 190D cars. Including Cosworth (2.3 16v and 2.5 16v), EVO 1 and EVO 2 models. Modified and concourse, track cars and daily drivers, all are welcome.

This free UK based club was started back in November 2005 to serve the w201 community and now has over 4000 members from all around the world and 340,000 + posts.

The members welcome you and encourage you to stay a while and have a look around. We offer you friendly chat and access to some very useful information as well as tutorials with photos and videos for many common repair and maintenance jobs. Whatever your needs there is a good chance you will be able to find what your looking for. Such as our Mercedes 190 buyers guide

Sign up to gain access to all areas including for sale / classified areas and country wide meetings and events. Many forum features and sections are only available once you sign up.

Join our us at mercedes190.co.uk!

If you're already a member please log in to your account:

AMG fender spacer kit details and install
Topic Started: Fri Sep 11, 2009 2:54 pm (206 Views)
dan_189	Fri Sep 11, 2009 2:54 pm Post #1
Member Posts: 123 Group: Members Member #2,507 Joined: April 10, 2008	Wrote this up for the rev and thought I would share it with you guys: Sizes of the bolts and spacers in the AMG fender spacer kit. MB part number: B6 6 02 0071 for all those who want the original kit like I did I needed this kit as I had my guards rolled and that didnt fix my problem, I bought a guard roller and that didnt help either so I bought the kit. I have 225/45/17s on 17x8.25s ET34. I had 215/45/17s ET37 and for people with rubbing issues on those sized rims and tires this kit will not fix your problem you will need your guards rolled. Details of kit: Note: Pictures only show half the kit and some of the original bolts in the top right corner of the bag Kit contains: All bolts have a 10mm hex head All lengths given without washer, every bolt has a washer 0.1cm in width and 2cm in diameter 4 x: LENGTH: 3 cm 4 x: LENGTH: 2 cm 2 x: LENGTH: 4 cm 6 x: polyurethane spacers Diameter: 3cm Height:1.5cm Hole: 1cm 2 x: polyurethane spacers Diameter: 2cm Height:0.5cm Hole: 0.7cm Install: 1. Remove indicator, unscrew plastic screws, unplug and pull out, remove screw underneath. 2. Remove side bumper bar screw located in the wheel well, leave attatching plastic part in place. 3. Unscrew 2 bolts behind bumper bar to the left or right depending on which side you are doing. I didnt pull the bumper completely off its up to you. 4. Pull bumper down on the side to revel bolt where the fender meets bumper and unscrew. 5. Unscrew bolt below indicator spot holding fender to the car. 6. Unscrew panel just below headlight, bolt in the bottom corner of the headlight. 7. Place large sized spacer behind the fender where we unscrewed bolt in step 4. 8. Place smaller spacer and screw in place of screw we undid in step 5. 9. Place original screw back that we undid in step 6. 10. Place large spacer behind bumper where we undid screw in step 2. 11. Do up 2 bumper bolts Please note: - I have not installed the rear spacer and screw - I did not remove bumper but I had enough space to work with so I didnt have to. Comparison: Right side has the kit, left side is standard keep in mind I have not installed the rear render spacer yet as I dont know how to pull off the cladding, any ideas anyone? Thanks



JM Motorsport	Fri Sep 11, 2009 5:06 pm Post #2
Member Posts: 904 Group: Members Member #398 Joined: July 11, 2006	Great, thanks for sharing!



1 user reading this topic (1 Guest and 0 Anonymous)


« Previous Topic · Wheels & Tyres · Next Topic »