Pull Starter Fix

Welcome to Making Trax. We hope you enjoy your visit.

You're currently viewing our forum as a guest. This means you are limited to certain areas of the board and there are some features you can't use. If you join our community, you'll be able to access member-only sections, and use many member-only features such as customizing your profile, sending personal messages, and voting in polls. Registration is simple, fast, and completely free.

Join our community!

If you're already a member please log in to your account to access all of our features:

Pull Starter Fix; Helpful Tip
Topic Started: Mar 7 2007, 04:20 PM (235 Views)
maintguy69	Mar 7 2007, 04:20 PM Post #1
Swayed by the Trax Posts: 3 Group: Member Member #218 Joined: March 7, 2007	New blizzard about a 1/2 gallon thru it. Notice pullstarter wasn't retracting all the way. Pulled the engine to investgate. nothing seemed to be wrong. So I thought maybe I might put a little more tension on pullstart to fix the problem, but that didn't work. So here is my fix if you happen to have the same problem. Pull out about 6 inches or so, wrap the cord around something (SO IT CANNOT RETRACT INTO THE HOUSING) pull the cord out of the handle end and cut off about an inch or so of cord, re knot it, work it back into the handle. Now you can undo whatever meens you use to keep the cord from retacting. So be good to go then. It seems that there is just a little to much cord to fit on the spool, so this is a quick and permanat fix.



1 user reading this topic (1 Guest and 0 Anonymous)


« Previous Topic · Nitro Blizzard GP / DF-300 GP · Next Topic »